IEI Integration AFL2-12A-HM65 v1.12 - Manual (Page 74)

AFL2-12A-HM65 Series Panel PC
Page 60
6.1 Introduction
A licensed copy of the BIOS is preprogrammed into the ROM BIOS. The BIOS setup
program allows users to modify the basic system configuration. This chapter describes
how to access the BIOS setup program and the configuration options that may be
changed.
NOTE:
Some of the BIOS options may vary throughout the life cycle of the
product and are subject to change without prior notice.
6.1.1 Starting Setup
The UEFI BIOS is activated when the computer is turned on. The setup program can be
activated in one of two ways.
1. Press the F2 or DEL key as soon as the system is turned on or
2. Press the F2 or DEL key when the “Press F2 to enter SETUP”
message appears on the screen. 0.
If the message disappears before the F2 OR DEL key is pressed, restart the computer and
try again.
6.1.2 Using Setup
Use the arrow keys to highlight items, press E NTER to select, use the PageUp and
PageDown keys to change entries, press F1 for help and press E SC to quit. Navigation
keys are shown in the following table.
Key Function
Up arrow Move to the item above
Down arrow Move to the item below