IEI Integration AFL2-12A-HM65 v1.12 - Manual (Page 55)

AFL2-12A-HM65 Series Panel PC
Page 41
Step 7: Align the mounting screws on the monitor rear panel with the mounting holes on
the bracket.
Step 8: Carefully insert the screws through the holes and gently pull the monitor
downwards until the monitor rests securely in the slotted holes (
6
Figure 4-17).
Ensure that all four of the mounting screws fit snuggly into their respective
slotted holes.
NOTE:
In the diagram below the bracket is already installed on the wall.
Figure 4-17: Chassis Support Screws
Step 9: Secure the panel PC by fastening the captive screw of the wall-mounting
bracket. (
6
Figure 4-18).