5 wall mounting – IEI Integration AFL2-12A-HM65 v1.12 User Manual

Page 53

Advertising

AFL2-12A-HM65 Series Panel PC

Page 39

Figure 4-15: Stand Mounting (Stand-A12-RS)

4.8.5 Wall Mounting

To mount the flat bezel panel PC onto the wall, please follow the steps below.

Step 1:

Select the location on the wall for the wall-mounting bracket.

Step 2:

Carefully mark the locations of the four screw holes in the bracket on the wall.

Step 3:

Drill four pilot holes at the marked locations on the wall for the bracket retention

screws.

Step 4:

Align the wall-mounting bracket screw holes with the pilot holes.

Step 5:

Secure the mounting-bracket to the wall by inserting the retention screws into

the four pilot holes and tightening them (

Figure 4-16).

Advertising