IEI Integration AFL2-12A-HM65 v1.12 - Manual (Page 59)

AFL2-12A-HM65 Series Panel PC
Page 45
Pin Description Pin Description
4 NRTS3 8 NRI3
Table 4-1: Ethernet Connector Pinouts
Figure 4-21: Ethernet Connector
Follow the steps below to connect a serial device to the RJ-45 serial port connector of the
AFL2-12A-HM65 panel PC.
Step 1: Locate the RJ-45 serial port. The location of the RJ-45 serial port is shown in
Chapter 1.
Step 2: Connect the RJ-45 to COM port cable to the panel PC. Insert the RJ-45
connector end of cable into the RJ-45 serial port. See
6
Figure 4-22.
Step 3: Connect the serial device. Connect a serial device to the D-sub 9 connector
end of the cable. See
6
Figure 4-22.
Figure 4-22: RJ-45 Serial Port Connector