5 replacing components, 1 memory module replacement – IEI Integration AFL2-12A-HM65 v1.12 User Manual
Page 68
AFL2-12A-HM65 Series Panel PC
Page 54
Figure 5-2: Internal Cover Retention Screws
Step 2:
Lift the aluminum cover off the AFL2-12A-HM65.
Step 0:
5.5 Replacing Components
5.5.1 Memory Module Replacement
The flat bezel panel PC may be preinstalled with a DDR3 memory module. If the memory
module fails, follow the instructions below to replace the memory module.
Step 1:
Follow all anti-static procedures. See Section
6
5.2.
Step 2:
Turn off the power. See Section
6
5.3.
Step 3:
Remove the back cover. See Section
6
5.4.1 above.
Step 4:
Remove the internal aluminum back cover. See Section
6
5.4.2 above.
Step 5:
Locate the DDR3 SO-DIMM on the motherboard.
Step 6:
Remove the DDR3 memory module by pulling both the spring retainer clips
outward from the socket.