IEI Integration AFL2-12A-HM65 v1.12 - Manual (Page 54)

AFL2-12A-HM65 Series Panel PC
Page 40
Figure 4-16: Wall-mounting Bracket
Step 6: Insert the four monitor mounting screws provided in the wall mount kit into the
four screw holes on the real panel of the flat bezel panel PC and tighten until the
screw shank is secured against the rear panel (
6
Figure 4-17).
WARNING:
Please use the M4 screws provided in the wall mount kit for the rear panel.
If the screw is missing, the thread depth of the replacement screw should
be not more than 4 mm.