5 install the backplane – IEI Integration RPC-6106_6108 User Manual
Page 37
Advertising
RPC-6106/6108 Rackmount LCD Workstation
4.5.5 Install the Backplane
To install a backplane, follow the instructions below.
Step 1:
Install the correct amount of copper pillars (Figure 4-4) into the base of the
chassis.
NOTE:
The backplane shown in Figure 4-4 is an example for reference only.
The location and number of copper pillars depends on the backplane
being used.
Figure 4-4: Install Copper Pillars and White Spacers
Page 27
Advertising