Figure 7-7: controller installation directory – IEI Integration RPC-6106_6108 User Manual
Page 73
Advertising
RPC-6106/6108 Rackmount LCD Workstation
Step 9:
The user is then prompted to ensure the touch monitor or the USB for the touch
controller is plugged into the system (Figure 7-6). Once the touch controller is
plugged into the system, click “OK.”
Figure 7-6: Touch Monitor/USB Touch Controller Confirmation
Step 10:
The user is then prompted to select multi-monitor system support (Figure 6-7).
Make the appropriate selection and click N
EXT
to continue.
Figure 7-7: Controller Installation Directory
Page 63
Advertising