Figure 4-6: slot cover retention screw – IEI Integration RPC-6106_6108 User Manual
Page 39
Advertising
RPC-6106/6108 Rackmount LCD Workstation
CAUTION:
Depending on the location of the CPU card, the disk drive ribbon cable
connectors and other peripheral device cable connectors may have to
be connected to the CPU card before it can be installed.
To install a CPU card onto the backplane, follow the instructions below:
Step 1:
Remove the slot cover retention screw to remove the slot bracket from the
chassis rear panel (Figure 4-6).
Figure 4-6: Slot Cover Retention Screw
Step 2:
Slide the CPU card into the reserved PCI/ISA socket on the backplane. (Figure
4-7)
Page 29
Advertising