IEI Integration RPC-6106_6108 - Manual (Page 41)

RPC-6106/6108 Rackmount LCD Workstation
PSU cables
Disk drive ribbon cables
RS-232 cable (T-R models only)
Other connections may have to be made; please refer to the documentation that came
with the CPU card.
4.5.8.1 VGA Cable
To monitor the system on the LCD on the front panel, use the VGA cable in the package to
connect the AD board and the VGA connector on the external interface of the CPU card.
Follow the steps below to connect the VGA cable.
Step 1: Connect VGA cable to the VGA connector on the AD board (Figure 4-8).
Figure 4-8: VGA Connector on the AD Board
Step 2: Loosen the two thumb screws to remove the cover of the cable window on the
front panel of the RPC-6106/6108.
Step 3: Make the VGA cable go around the CPU card and pull the cable out through the
cable window in the front panel of the RPC-6106/6108 (Figure 4-9).
Page 31