7 install the pci/isa expansion card, 8 connect the cables, Figure 4-7: install the cpu card – IEI Integration RPC-6106_6108 User Manual
Page 40
RPC-6106/6108 Rackmount LCD Workstation
Figure 4-7: Install the CPU Card
Step 3:
To secure the CPU card, reinsert the previously removed slot cover retention
screw.
Step 0:
4.5.7 Install the PCI/ISA Expansion Card
To install a PCI expansion card or an ISA expansion card please follow the instructions
below.
Step 1:
Remove the slot cover retention screw to remove the slot bracket from the
chassis rear panel (Figure 4-6).
Step 2:
Slide the PCI/ISA expansion card into the reserved PCI/ISA socket on the
backplane.
Step 3:
To secure the PCI/ISA expansion card, reinsert the previously removed slot
cover retention screw and reinstall the card bracket.
Step 0:
4.5.8 Connect the Cables
The following cables may have to be connected depending on the CPU board and the
backplane installed in the system:
VGA cable
Page 30