SaltDogg 92420A, -30A Series Under Tailgate Spreader (with Serial No. 8000) - Manual (Page 2)

2
TM
D. Align the pin brace (Item 4) on the dump body
using the iron brace (Item 3) for exact positioning.
For proper fit, hanger iron brace may require some
minor bending.
E. Weld the (2) pin braces (Item 4) to the dump
body sides, all around.
F. Attach the iron braces (Item 3) to the pin braces
on the sides of the dump body and the sides of the
spreader using (2) hairpin cotter pins (Item 5).
G. If there is a gap between the spreader and the
dump body, weld or bolt a steel strip to the forward
edge of the spreader to cover the gap.
H. If you have purchased the tailgate side shields
(purchased separately as P/N 924F0106PR or
924F0106SSPR, Stainless), bolt or weld them to the
inside of the tailgate to prevent material spillage at
the ends of the spreader.
1
2
3
4
5
DUMP BODY
SPREADER
FRAME
Mounting Hardware Installation Drawing
Bill of Materials
1 2 Quick Detach Plate 924F0102 3009526
2 2 Hinge Pin 924F0103 3011139
3 2 Hanger Iron Brace 924F0101 3011137
4 2 Pin Brace 9240021B 3000210
5 6 Hair Pin Cotter 5/32" HP12 HP12
item qty. description carbon stainless