Watlow CAS200 - Manual (Page 32)

Chapter 2: Installation CAS200 User’s Guide
20 Watlow Anafaze
Figure 2.8 Power Connections with the
CAS200 Power Supply
Table 2.2 Power Connections
1. Plug in and test the +/- voltage of your power supply to
determine polarity.
2. Locate the + and - connectors at the left on the back of
the scanner.
3. Attach the positive wire to the + connector on TB2 and
tighten.
4. Attach the negative wire to the COM connector on TB2
and tighten.
Function Power Supply CAS200 TB2
DC Power +12 to 24Vdc +
DC Common
12 to 24Vdc
Common
-
Earth Ground Ground
** Connect terminals to ac panel ground.
SSR
SSR SSR
SSR
G
N
D
+5V
5V COM
+15V
-15V
Ground
AC Line
AC Neutral
15V COM
Add jumper *
CAS200
Power Supply
white
black
green
G
H
N
120/240
Supply
**
**
* If using 5Vdc for outputs, jumper 5V common to 15V common.
C
O
M
V
+
Vac