Watlow CAS200 - Manual (Page 78)

Chapter 4: Setup CAS200 User’s Guide
66 Watlow Anafaze
Digital Output Test
This menu lets you manually toggle a digital output On or
Off to test it. (Select the output to test in the previous
menu.) On may be Low or High depending on the digital
output polarity you set. (All outputs are set to Off when you
exit this menu.)
Press Yes or No to toggle the output state between On and
Off.
Keypad Test
This menu lets you test the keypad. Press any key on the
keypad to test the response. The CAS200 will display the
name of the key you have pressed.
CHANNEL PROCESS UNITS
CHANNEL NAME ALARM STATUS
DIGITAL OUTPUT
NUMBER 34: OFF
CHANNEL PROCESS UNITS
CHANNEL NAME ALARM STATUS
KEYPAD TEST
QUIT = "NO" + "NO"