Watlow CAS200 - Manual (Page 49)

CAS200 User’s Guide Chapter 3: Using the CAS200
Watlow Anafaze 37
∫
WARNING! The NO-key reset clears the system's memory
and reinitializes the CAS200 factory defaults. To
do a Manual System Reset, power down the
CAS200, press and hold the No key during power-
up. This is required during installation, after
changing the EPROM, or when troubleshooting.
The Back key works like an "escape" key. Press it to:
• Abort editing.
• Return to a previous menu.
• Switch between single channel and job control
displays.
• Press the Enter key to:
• Store data or menu choices after editing and go to the
next menu.
• Start scanning mode (if pressed twice).
• Press Alarm Ack to:
• Acknowledge an alarm condition and reset the global
alarm.
• Stop the scanning display.
• Press Alarm Reset to:
• Clear an alarm when the process is in a non-alarming
state.
• Acknowledge an alarm if the process is in an alarming
state.
Back BACK
Enter
ENTER
Alarm Ack ALARM
ACK
Alarm Reset
ALARM
RESET