Watlow CAS200 - Manual (Page 53)

Watlow Anafaze 41
4
Setup
CAS200 Menus
The Setup menus let you change detailed configuration
information.
How to Enter the Setup Menus
1. In Single Channel Display, select the channel you wish
to edit.
2. While still in Single Channel Display, enter the pass
sequence below: Press Enter, Alarm Ack, Change
Setpoint.
3. The first setup menu appears.
NOTE! If you are in the Setup menus and you don't make
any changes for three minutes, the CAS200 re-
verts to Single Channel Display for your protec-
tion.
ENTER ALARM
ACK
CHNG
SP
CHANNEL PROCESS UNITS
CHANNEL NAME ALARM STATUS
SETUP GLOBAL
PARAMETERS?