Watlow Series 988 - Manual (Page 41)

WATLOW Series 988 User’s Manual 4.13 Setup Menus, Chapter 4
Setup-Input
˜
NOTE:
See Chapter 8 for
more information
on slidewire feed-
back.
Learn Low
Write the low-end resistance of the slidewire potentiometer to the
range low 2 parameter.
[LrnL] This prompt appears only on controllers equipped with input 2
hardware and with Input 2
[`In2] set to [SLid] or [`POt].
Default
↓
[``no] [`YES]
[LrnL] [LrnL]
Learn High
Write the high-end resistance of the slidewire potentiometer to the
range low 2 parameter.
[LrnH] This prompt appears only on controllers equipped with input 2
hardware and with Input 2
[`In2] set to [SLid] or [`POt].
Default
↓
[``no] [`YES]
[LrnH] [LrnH]
[LrnL]
[LrnH]
˜
NOTE:
See Chapter 8 for
more information
on slidewire feed-
back.