Watlow Series 988 - Manual (Page 64)

4.36 WATLOW Series 988 User’s Manual Setup Menus, Chapter 4
Setup-Global
Error Latching
Select whether errors will be latching or non-latching.
• Non-latching alarms [`nLA] turn off when there is no alarm condition.
• Latching alarms [`LAt] must be turned off manually.
[`Err] This prompt always appears.
Default
↓
[`nLA] [`LAt]
[`Err] [`Err]
Control Type
Select a control method: normal [`nor]; cascade [CSCd]; ratio [rAti];
or differential [diFF].
[CntL] This prompt appears only on controllers equipped with enhanced
software (98_B-_ _ _ _-_ _ _ _) and input 2 hardware for a basic thermocou-
ple signal conditioner (98_ _-_1_ _-_ _ _ _) or a universal signal conditioner
(98_ _-_2_ _-_ _ _ _) and with
[`rSP] set to [`OFF].
Default
↓
[`nor] [CSCd] [rAti] [diFF]
[CntL] [CntL] [CntL] [CntL]
[`Err]
[CntL]