Watlow Series 988 - Manual (Page 87)

WATLOW Series 988 User’s Manual 5.11 Operation Menus, Chapter 5
Operation-PID A or B
Reset, Output 1
Tune reset to eliminate the offset or droop between the set point and
the actual process temperature for PID output 1. When set to
[```0]
reset is disabled.
[rE1A] This prompt appears only if [`dFL] (Calibration Menu) is set to
[``US] and [Pb1A] is not set to [```0].
If Default
↓ ↓
[00)0] … [99(9] repeats/min.
[rE1A] [rE1A]
[`Pdr] [=0)0]% … [``)0] % … [10)0] %
[ALG0] [rE1A] [rE1A] [rE1A]
(Global Menu)
Integral, Output 1
Tune integral to eliminate the offset or droop between the set point
and the actual process temperature for PID output 1. When set to
[```0] integral is disabled.
[It1A] This prompt appears only if [`dFL] (Calibration Menu) is set to
[``S1] and [Pb1A] is not set to [```0].
Default
↓
[`)00] … [9(99] min. / repeat
[It1A] [It1A]
[rE1A]
[rE1b]
[It1A]
[It1b]
˜
NOTE:
The PID B Menu
appears only on
controllers with
enhanced software
(98_B-_ _ _ _-_ _ _ _).