Yokogawa EJX118A User Manual
Page 54
<8. General Specifications>
8-12
IM 01C25H01-01E
*1:
See table 8.3 ‘Gasket contact surface’ on page 8-4.
*2:
Even in case where fill fluid code D (fluorinated oil) is selected, if degrease cleansing treatment or both degrease cleansing and
dehydrating treatment for the wetted parts is required, specify option code K1 or K5.
*3:
The specified capillary length includes the extension length (X2) and the flange thickness (t).
*4:
Forged version of the material may be used.
*5: The upper ambient temperature limit is 50°C (122°F) when specifying process connection size code 3 (3-inch).
The “#” marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use of 316 SST
material, there may be certain limitations for pressure and temperature. Please refer to NACE standards for details.