Yokogawa SPS24 - Manual (Page 11)

<2. Preparation and Basic Operation>
2-1
IM 12A01S02-01E 1st Edition : May 10, 2013-00
2. Preparation and Basic Operation
This section describes the procedures for using the SPS24 SENCOM PC Software.
l SPS24 system requirements
Operating system (OS): Windows 7 SP1 (32 bit/64 bit) or Windows XP Professional SP3
The operating system language and the software language are either
English or Japanese.
PC hardware: Installed with either of the OSs above and equipped with the CPU and
memory listed below.
Windows 7 Intel Core 2 Duo CPU E7500 or higher. Minimum 2 GB RAM
Windows XP Intel Pentium 4 CPU 1.6 GHz (x64/x86) or higher. Minimum 512 MB RAM
Display: XGA (1024×768) or larger
HDD: At least 100 MB for application (more space may be required to save
data).
Drive: (required for installation)
Numbers of USB ports: Depends on the number of SENCOM sensors to be connected (1 to 4).
Printer:
Units that can operate with either of the Windows systems above.
2.1 Driver Installation
When installing the driver for interface boxes, follow the messages that appear in the dialog box.
SPS24 can be installed before this procedure.
CAUTION
• Before installing the driver software, close all applications.
• Uninstall the driver software before re-installation.
CAUTION
• In the case of Window 7, log in as a user with system administrator privileges.
• In the case of Windows XP, log in with a user name (single-byte characters) that is included
in the Administrator group. The program cannot be installed properly if the user name
entered contains double-byte characters. The program will not run properly if logged in with
a user name that is not included in the Administrator group.
n Installation for Windows 7
1. Start Windows 7.
2. Insert the SPS24 CD into the drive. The startup screen automatically appears. When the
AutoPlay view appears without the startup screen, clicking on “Run SPS24_Launcher.exe”
displays the startup screen.