Yokogawa SPS24 - Manual (Page 12)

<2. Preparation and Basic Operation>
2-2
IM 12A01S02-01E 1st Edition : May 10, 2013-00
3. Click on “Install the interface box driver”.
4. The “User Account Control” screen is displayed. Click “Yes” to continue.
5. The “Welcome to Yokogawa Driver for interface box setup” screen is displayed. Click “Next”
to continue.
6. The “Ready to Install the Program” message appears. Click “Install”.
7. The “Windows Security” screen appears. Click “Install”. (USB device driver)
8. The “Windows Security” screen appears. Click “Install”. (Com port driver)
9. The “InstallShield Wizard Complete” screen appears. Click “Finish”.
Windows 7 driver installation is complete.
Connect a cable for the interface box to a USB port on the PC for automatic detection.
n Installation for Windows XP
1. Start Windows.
2. Insert the SPS24 CD into the drive. The startup screen is automatically displayed.
3. Click on “Install the interface box driver”.
4. The “Welcome to Yokogawa Driver for interface box setup” screen is displayed. Click “Next”
to continue.
5. The “Ready to Install the Program” message appears. Click “Install”.
6. A dialog box appears with a warning message that the driver has not passed Windows Logo
testing for compatibility verification. Ignore this and click “continue”. Although the same
warning appears again, click “continue”.
7. The “InstallShield Wizard Complete” screen appears. Click “Finish”.
Windows XP driver installation is complete.