Yokogawa SPS24 - Manual (Page 24)

<4. Database Viewer>
4-2
IM 12A01S02-01E 1st Edition : May 10, 2013-00
l [Add ID]
Add ID is available only for non-digital pH/ORP sensors. Use this function for managing data of
non-digital pH/ORP sensors in the database.
Register new ID data.
Add or change data by clicking on fields shown in boxes and save the changes.
l [Delete ID]
This function deletes sensor ID data that was selected with a checkbox.
Sensor ID data of any connected sensors cannot be deleted.
To delete multiple data, tick on “□ Do this for all current items.” Confirmation screens will not be
displayed individually.
l [Show all]/[Show checked]
[Show all] displays all sensor data.
[Show checked] displays the data of only sensors that were selected with a checkbox.
l [Select column]
Selects items to be displayed. Number, ID (Serial No.), and Sensor fields are always displayed.
The display order cannot be changed.
All fields can be selected by clicking on “Indication Item”.
n File Menu
This can also be accessed from “File” on the menu bar.
Output files include all information regardless of items displayed.
The file name can be up to 255 single-byte characters (127 double-byte characters).
A file name cannot contain any of the following characters: + * / ? ” < > |
l [Export to PDF]
Creates a PDF file for the sensor data selected with a checkbox. Contents of the PDF are
identical to those of the print-out generated with [Print report].
Multiple PDF files can be created. Each has a selected ID.
Clicking on [Export to PDF] displays a 3-line text box where comments can be entered. The
comment entered will appear at the top right of the report. Up to 20 single-byte characters (10
double-byte characters) can be entered per line.
Enter the file name (default name is 1_ID(Serial No.).pdf) and save the file.
l [Export to Excel]
Creates an Excel file for the sensor data selected with a checkbox. Multiple files can be selected.
Each has a selected ID.
Enter the file name (default name is smart1_(yymmddhhmmss).xls) and save the file.
l [Print report]
Prints a report for the sensor data selected with a checkbox. Individual reports will be printed
when multiple sensors are selected. Contents of the printed report are identical to those of the file
generated with [Export to PDF].