Yokogawa SPS24 - Manual (Page 15)

<2. Preparation and Basic Operation>
2-5
IM 12A01S02-01E 1st Edition : May 10, 2013-00
2.4 Sensor Connection
For information on how to connect FU20F SENCOM sensors and WU11 SENCOM cables, refer
to IM 12B06J03-04E.
For the FLXA21 2-wire liquid analyzer, refer to IM 12A01A02-01E.
SENCOM sensor
Connector connection
Windows PC
WU11
SENCOM cable (3m) *
WU11
SENCOM cable
USB cable *
*: SPS24 accessory
SPS24
SENCOM
PC Software
FLXA21
Interface box *
<Field Application>
<Lab Application>
Figure 2.1 Example of SENCOM sensor connection and usage
Connect SENCOM sensors as shown in Figure 2.1.
When connecting to a FLXA21, connecting/disconnecting is performed at the connector by
removing the WU11 SENCOM cable.
Connect the WU11 SENCOM cable terminal to the pin terminal of the interface box.
Connect the enclosed USB cable to the interface box and a USB port on the PC.
Up to 4 SENCOM sensors can be connected to a PC at the same time. For multiple connections,
the same number of interface boxes and USB cables is required (see Figure 1.1).