Yokogawa SC72 Personal Handheld Conductivity Meter - Manual (Page 26)

IM 12D03D02-01E
4-1
4. Keyswitch Functions
4. Keyswitch Functions
There are seven membrane keys on the keyboard of the Personal Conductivity meter.
The following key functions are provided.
* Display the conductivity, measured temperature and temperature coefficient.
* Display the conductivity, date and time.
* Hold conductivity and temperature measurements.
* Store conductivity and temperature measured data.
* Other functions such as parameter setting.
POWER
Auto Power Off
HOLD
F/ENT
MEAS
DATA
F040001.EPS
When meter is OFF, press for at
least 1 sec. to turn on power.
When meter is ON, press for
about 2 sec. to turn off the power.
Automatic Power OFF function
default: 20 min. inactivity.
Press to start
measurement mode.
If already in MEAS
mode, it switches the
display panel.
Change set value.
If pressed while in
MEAS mode, switches
to function mode. Also
used to enter set
value.
If you press this key during
measurement, mark is
displayed, and present measured
values are held. To cancel, press
or keys.
If pressed during measurement,
mark flashes.
Press key to store measured
values in memory.
To abort data storage and return to
MEAS mode, press or key
again while mark is flashing.
MEAS
MEAS
F/ENT
HOLD
DATA