Yokogawa SC72 Personal Handheld Conductivity Meter - Manual (Page 33)

IM 12D03D02-01E 4-8
4. Keyswitch Functions
(2) Temperature compensation setting (t.Co) panel
This panel is used to change the temperature compensation type and temperature
coefficient setting. The TEMP mark appears on the panel.
• Automatic temperature compensation for NaCl solution
Press the keys to select NaCl . Then press the F/ENT key.
• Manual temperature compensation coefficient setting
Press the keys to select %/
؇C (or %/؇F). Then press the
F/ENT key. Use the
keys to set the temperature coefficient. Then press the F/ENT key.
Use keys to select
For NaCl: When NaCl is displayed,
press key to confirm.
F/ENT
F/ENT
F040302.EPS
For manual setting: When %/ ؇ C (or %/ ؇ F) is displayed,
set the temperature coefficient with
keys. Press key to complete
the temperature coefficient setting.
F/ENT
F/ENT