Yokogawa Value Series FX1000 - Manual (Page 60)

2-47
IM 04L21B01-64EN
Configuring the FX1000
1
2
3
8
Index
Ethernet
TCP/IP
The settings vary depending on how the IP address is acquired.
Consult with your network administrator for the network parameters such as the IP
address, subnet mask, default gateway, and DNS.
When using a fixed IP address
• DHCP
Set [DHCP] to [OFF].
• Host Name
Set the FX’s host name using up to 64 alphanumeric characters. You do not have to
set this parameter.
• IP Address
Set the IP address to assign to the FX.
• Subnet Mask
Set the subnet mask according to the system or network to which the FX belongs.
• Default Gateway
Set the IP address of the gateway.
• Domain Name
Set the network domain name that the FX belongs to using up to 64 characters. You
do not have to set this parameter.
• Server Primary, Server Secondary
Register up to two IP addresses for the primary and secondary DNS servers.
• Domain Primary, Domain Secondary
Set up to two domain suffixes: primary and secondary.
When obtaining the IP address from DHCP
• DHCP
Select [ON].
• Host Name
Use up to 64 alphanumeric characters to set the FX host name.
• DNS accession
To automatically obtain the DNS server address, select [ON]. Otherwise, select [OFF].
If you select [OFF], you must set the IP address of the DNS server.
2.6 Entering Basic Settings