Yokogawa Value Series FX1000 User Manual
Page 73
Advertising
2-60
IM 04L21B01-64EN
Connect limits
Modbus Server
• Connect limits
Select [ON] to place connection limits.
• Allowed IP Address
If you want to only allow certain IP addresses to connect to the FX Modbus server, set
[Use] to [ON] and enter IP addresses (in the range of 0.0.0.0 to 255.255.255.255) in
the [Allowed IP Address] boxes. You cannot enter host names.
Only the IP addresses specified here can connect to the FX Modbus server.
2.6 Entering Basic Settings
Advertising