Yokogawa Value Series FX1000 - Manual (Page 8)

Before using DAQST
ANDARD
1.1 Overview of DAQSTANDARD
DAQSTANDARD Software Package
DAQSTANDARD consists of the following two software applications.
• Viewer
• Hardware Configurator
This manual explains the Hardware Configurator.
• Viewer
Data Viewer displays the values and waveforms of the measured data from the
recorder and prints them.
• Hardware Configurator
Hardware Configurator is a software application for creating setup data for the
recorder. It can send setup files that you have created to the recorder and save them
to storage media.
About Hardware Configurator
Creating Setup Data
You can use one of the following three methods to create setup data:
• Specify a new device and options.
• Edit setup data that is stored on an external storage medium or the PC.
• Edit setup data received from the recorder.
Configuring the Recorder
You can use one of the following two methods to configure the recorder:
• Load the settings to the recorder from a CF card or other external storage medium.
• Send the setup data to the recorder.
Printing Setup Data
You can print setup data.
Recorder Information Acquisition
You can acquire the recorder’s device information through communication.
Chapter 1 Before using DAQSTANDARD
1-1
IM 04L21B01-64EN
1
2
3
8
Index