Yokogawa Value Series FX1000 - Manual (Page 79)

2-66
IM 04L21B01-64EN
Sending Setup Data Other Than the Address Setup Data
1. Click the [Send Data] button, or select [Comm.] - [Send Setting] from the menu
bar.
The [Network] dialog box appears.
2. Enter the parameters, and click the [OK] button.
The [Store] dialog box appears.
3. Click [OK].
Data transfer starts. A message appears to indicate when data transfer has stopped. Click
[OK] to close the message. The settings that you sent are applied.
2.7 Sending the Setup Data to the FX