Yokogawa PC-Based MX100 - Manual (Page 54)

4-5
IM MW180-01E
Calibrator
1
2
3
4
5
App
Index
2. On the calibration detail setup screen that appears, select the channel and range
to be calibrated and click the >> button.
The figure below is an example of the 4-CH, High-Speed Universal Input Module.
Items to be calibrated
You can also click to select
To move to the calibration
execution screen 1
Select the channel and the
measurement range to be
calibrated from the list
The figure below is an example of the 10-CH, Medium-Speed Universal Input
Module. Channels are not selected.
Items to be calibrated
You can also click to select
To move to the calibration
execution screen 1
Select the measurement
range to be calibrated
from the list
The figure below is an example of the 30-CH, Medium-Speed DCV/TC/DI Input
Module. Channels are not selected.
Items to be calibrated
You can also click to select
To move to the calibration
execution screen 1
Select the measurement
range to be calibrated
from the list
4.2 Calibration Procedure