Yokogawa PC-Based MX100 - Manual (Page 57)

4-8
IM MW180-01E
The figure below is an example of the 8-CH, Medium-Speed Analog Output Module.
Exp. Calibration execution screen 1
Start calibration
Return to the previous screen
Return to the Unit Information screen
When you click the Calibrate button, a message “Please wait and do not perform
any other operation.” appears.
When the calibration completes successfully, the calibration execution screen 2
appears.
If the calibration fails, a message “Failed to calibrate.” appears.
Note
For a description of the accuracy of the connected input module, the calibration accuracy, and the
environmental conditions for calibration, see the MW100 Data Acquisition Unit User’s Manual (IM
MW100-01E).
4.2 Calibration Procedure