Yokogawa PC-Based MX100 - Manual (Page 4)

4
IM MX100-0E
Thank you for purchasing the MX100 Data Acquisition Unit.
This manual concisely describes the handling procedures of the MX100 Data Acquisition
Unit (hereinafter the “MX100”) and basic operations on the MX100 Standard Software.
To ensure correct use, please read this manual thoroughly before beginning operation.
The five manuals below relating to the MX100 are provided in addition to this one. Read
them along with this manual. Note that the MX100 Data Acquisition Unit User’s Manual
(IM MX100-01E), this manual (IM MX100-02E), and the MX100 Standard Software User’
s Manual (IM MX180-01E) are all available on the MX100 Manual CD-ROM.
Manual Title Manual No. Description
MX100 Data Acquisition Unit
User’s Manual
IM MX100-01E Describes the functions, installation, wiring
procedures, handling precautions, and other
information about the MX100.
Precautions on the Use of the MX100/
MW100 Data Acquisition Unit
IM MX100-71E Summarizes the usage precautions of the
MX100/MW100.
MX100/MW100 Data Acquisition Unit
Installation and Connection Guide
IM MX100-72E Describes concisely the installation and
wiring procedures of the MX100/MW100.
Control of pollution caused by
MX100/MW100 products
IM MX100-91C Describes control of pollution caused by the
product.
MX100 Standard Software
User’s Manual
IM MX180-01E Describes the functions and operations of
the MX100 Standard Software that comes
standard with the MX100 main module.
Notes
• When configuring an MX100 system, the versions of the instruments used in the
system indicated by the hardware style number and software release number must
meet the following conditions.
• The main module style number must be greater than or equal to the style numbers
of any input/output modules.
• The PC software release number must be greater than or equal to the style number
of the main module.
Certain functions may become disabled on instruments or software that do not meet
these conditions, or the system may not be able to be built.
• This manual describes the MX100 style number “S3,” and release number R3.03 of
the MX100 Standard Software. Check the style number on the name plate (see page
5 for the location of the name plate).
• Every effort has been made in the preparation of this manual to ensure the accuracy
of its contents. However, should you have any questions or find any errors, please
contact YOKOGAWA dealer.
• This operation guide does not cover the handling and operating procedures of
Windows.
• Copying or reproducing all or any part of the contents of this manual without
YOKOGAWA’s permission is strictly prohibited.
• The TCP/IP software of this product and the document concerning the TCP/IP
software have been developed/created by YOKOGAWA based on the BSD Networking
Software, Release 1 that has been licensed from California University.
Trademarks
• DAQMASTER is a registered trademark of Yokogawa Electric Corporation.
• Microsoft and Windows are registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
• Adobe and Acrobat are registered trademarks or trademarks of Adobe Systems
Incorporated.
• Company and product names that appear in this manual are registered trademarks or
trademarks of their respective holders.
• The company and product names used in this manual are not accompanied by the
registered trademark or trademark symbols (® and ™).
Revisions
1st Edition: May, 2003 2nd Edition: November, 2004 3rd Edition: June, 2006
4th Edition: February, 2008 5th Edition: March, 2012
5th Edition: March 2012 (YK)
All Rights Reserved, Copyright © 2003 Yokogawa Electric Corporation