Yokogawa PC-Based MX100 - Manual (Page 41)

41
IM MX100-0E
To clear the cursors, choose Hide Cursor from the View menu.
Choose
Recording the Measured Data
For details on setting of the record start condition and setting the save destination and
file name of the record file, see page 30.
Record Start Operation
Click the Record button on the Monitor screen, or choose Record from the Acquisition
menu.
Click
or
Choose
When recording starts, the display changes as shown in the figure below. To divide the
file during recording, click the
Manual Save button or choose Manual Save from the
Acquisition menu.
When dividing files
Changes to red when recording starts
Changes to red when recording starts
Elapsed time of recording
or
Choose
If Start Condition described is not set to On Record, recording does not start until the
specified condition is met. While the Start Condition is not met, the word “Waiting”
appears under the Record button (see figure below).
Record Stop Operation
To stop recording when Stop Condition described is set to Manual or before the Stop
Condition is met, click the
Stop button or choose Stop from the Acquisition menu.
When the message “Stop Record?” appears, click OK.
Click
or
Choose
Operations of the MX100 Standard Software