Index, Pc system requrements – Yokogawa DAQWORX User Manual

Page 10

Advertising
background image

1-3

IM WX11-01E

Before Us

ng the Software

1

2

3

4

Index

1.2

PC System Requrements and Supported
Montor Servers

PC System Requrements

Supported Operatng Systems (OS)

Run DAQWORX under any of the following operating systems.

• Windows 2000 Professional SP4

• Windows XP Home Edition SP3

• Windows XP Professional SP3 (excluding Windows XP Professional x64 Editions)

• Windows Vista Home Premium SP2 (excluding the 64-bit editions)

• Windows Vista Business SP2 (excluding the 64-bit editions)

• Windows 7 Home Premium, SP1 (32-bit and 64-bit editions)

• Windows 7 Professional, SP1 (32-bit and 64-bit editions)

The language displayed by the software under different language versions of the OS are

as follows.

OS Language

Software Language

Japanese

Japanese

Other

English

PC

A PC that runs one of the OS above, and that meets the following CPU and memory

requirements.

When Usng Wndows 2000 or Wndows XP

Pentium 4, 1.6 GHz or faster Intel x64 or x86 processor; 512 MB or more of memory

When Usng Wndows Vsta

Pentium 4, 3 GHz or faster Intel x64 or x86 processor; 2 GB or more of memory

When Usng Wndows 7

32-bit edition: Intel Pentium 4, 3 GHz or faster x64 or x86 processor; 2 GB or more of

memory

64-bit edition: Intel x64 processor that is equivalent to Intel Pentium 4, 3 GHz or faster;

2 GB or more of memory

Hard Dsk

Free disk space: 200 MB or more

CD-ROM Drve

To be used for installing the software.

Mouse

A mouse supported by the OS.

Montor

A video card that is recommended for the OS and a display that is supported by the OS,

has a resolution of 1024×768 or higher, and that can show 65,536 colors (16-bit, high

color) or more.

Communcatons Interface

An Ethernet port supported by your operating system. Also, TCP/IP must be installed.

Note

• Do not use the time zone settings in the Windows Autoexec.bat file. If you see lines such as

TZ-GTM0 in your Autoexec.bat file, deactivate them by inserting a REM command in front.

• This software will not support data acquired after the year 2038.

Advertising