Yokogawa DAQWORX - Manual (Page 84)

2-73
IM WX11-01E
Creating Monitor Screens with
AddObserver Builder
1
2
3
4
Index
• Editing the Tab Page Group from the Properties Dialog Box
1. Select the tab page group.
2. Choose Edit > Properties or right-click and select Properties.
The Properties dialog box for the tab page group is displayed.
Select the mode by comparing
the brightness of the page tab
that is not displayed against
the page tab that is displayed.
Tab page displayed on
AddObserver panel
The first tab is 0.
Position and size displayed on AddObserver
3. Move the cursor to the desired item and enter a new value.
4. Click OK.
Note
When tab pages are grouped, the properties dialog box of each object cannot be opened. To
do so, you must ungroup.
Clearing the Tab Display
To clear the tab display, ungroup according to the aforementioned procedure.
1. Select the objects you wish to clear from the tab display.
2. Choose Arrangement > Ungroup or click Ungroup button on the arrangement
bar.
Removing Channel or Alarm Assignments from Objects
Deletes the channel information assigned to a change rectangle, meter, meter set, trend
graph, or other object, and the alarm level information of the channels assigned to the
signals.
1. Drag the CLEAR icon from the CHANNEL page of the operation panel.
2. Drop the icon on the object from which you wish to remove the channel or channel
alarm label assignment.
(1) Drag the CLEAR icon.
(2) Drop on a value rectangle, meter, meter set, trend graph, or indicator.
The assigned channel or alarm label is removed from the object.
2.30 Editing Objects