Yokogawa DAQWORX - Manual (Page 19)

2-8 IM WX11-01E
Enterng Channel Settngs
10. Click the CHANNEL tab. The channel settings page appears.
CHANNEL tab
Setting shortcut buttons.
For details, see page 2-10.
These are the numbers used for assigning channel or alarm labels to objects
such as meters and trend graphs.
11. Click the Host field for setting number 0000. Enter the host number (the number
from 0 to 0015 in the column under No. in the host page). A value from 0 to 15
can be entered.
12. Click the Channel
1
field. Enter the channel on the host you wish to assign
something to.
1 A value of 0 corresponds to a different value on each monitor server as follows:
DAQ32 Plus: No. is 001
DAQEXPLORER: CH is CH1
DAQLOGGER: Tag No. is 1
MXLOGGER: Record is 0001
GateCONTROL: Tag No. is TAG01
GateEye is set in the V-CHANNEL tab. 1 V channel is assigned to a single host.
For example, if you want to enter a setting corresponding to a No. setting on the DAQ32
Plus of 010, you must enter 9 for the channel setting on the AddObserver Builder.
You can click the [ … ] button to display a table of channels
2
when connecting to
the specified host (monitor server). To enter a channel from this table, click the
desired channel and then click the OK button.
2 You can choose to view the channel numbers, tag numbers, or tag comments in the
channel table. The number of channels that can be set is 1600.
Channel Number View Tag Comment View Tag Number View
2.4 Enterng Host and Channel Settngs