Yokogawa DAQWORX - Manual (Page 89)

2-78 IM WX11-01E
Changng the Grd Pont Spacng
Choose Arrangement > Grd, then select from None, 5 dots, and 10 dots.
Note
• If you select None, no grid will be displayed. Select 5 dots or 10 dots to display a grid with 5,
or 10 dots of space between the grid points.
• Also, when you select 5 dots or 10 dots, objects “snap” to position in 5, or 10 dot increments
when they are moved or expanded.
Swtchng between Channel, Tag No., and Tag Comment Dsplays
Choose Vew, then Channel, Tag No., or Tag Comment.
All meters on the monitor screen appear in the display mode selected.
Applyng a Dsplay Lmt (Clp)
Applying a display limit prevents you from moving objects totally or partially off-screen.
The limit is applied by default.
1. Choose Arrangement, then confirm whether the Limit command is selected or
unselected (is preceded by a check mark or not).
If Limit is unselected, you can select it by clicking on it in the menu.
2. Conversely, if Limit is selected, you can deselect it by clicking on it in the menu.
2.32 Changng Montor Screen Dsplay Propertes