Yokogawa DAQWORX - Manual (Page 22)

2-11 IM WX11-01E
Creat
ng Mon
tor Screens w
th
AddObserver Bu
lder
1
2
3
4
Index
Output Channel Detal Settngs
10. Click the Output Channel tab. The output channel setup page appears. An output
channel can only be added when the host type in the host detail settings is I/O
Channel.
OUTPUT CHANNEL tab
11. Output channels can only be assigned to output channel objects. Specify and
register the host names and channel numbers. Set the tag, tag comment, decimal
place (format), output maximum, output minimum, and units for each channel.
The maximum number of hosts that can be set is 1600.
For details on settings, see prcodures 12 through 14 under “Channel Detail
Settings.”
Controller Detal Settngs
10. Click the Controller tab. The controller setup page appears. A controller can only
be added when the host type in the detail settings is I/O Channel, and the I/O
Channel host information is successfully acquired.
CONTROLLER tab
If controller related channels or output channels are deleted or changed through
channel tags or output channel tags, the controllers are also deleted at the same
time.
The maximum number of controllers that can be registered is 128.
2.4 Enterng Host and Channel Settngs