Yokogawa DAQWORX User Manual

Page 35

Advertising
background image

2-24

IM WX11-01E

6.

Drag the cursor to the location of the opposite end of the arc.

An arc is created using a frame based on the two corner points specified in steps

5 and 6.

Anchor points (yellow frame)

Anchor points (blue frame)

7.

To change the arc’s length, click the arc to select it (usually items are selected as

soon as they are created).

8.

Move the cursor over one of the blue anchor points at the start or end of the arc.

9.

Drag the anchor point to a new position (you may only move the anchor point to a

new position along the arc itself).

10.

The other anchor point can also be moved in the same manner.

2.10 Creatng Arcs

Advertising