Yokogawa DAQWORX - Manual (Page 76)

2-65 IM WX11-01E
Creat
ng Mon
tor Screens w
th
AddObserver Bu
lder
1
2
3
4
Index
Edtng from the Propertes Dalog Box
1. Click the Edt icon under Objects in the EDIT page of the operation panel, or click
the Edt button in the object bar.
2. In the Edit area, select the rectangle or ellipse object you wish to edit.
3. Choose Edt > Propertes or right-click and select Properties.
The rectangle or ellipse’s properties dialog box opens.
If the Channel is None, it is dimmed.
If Manual is selected (blue), the following items can be set.
Thresholds: Select the number (1-4) of threshold values you wish to set.
The values are automatically sorted in ascending order.
Threshold values: Enter the threshold values at which the color changes.
Color: Select colors. When the measured value of the channel
assigned to the rectangle or ellipse object exceeds the
threshold, the color set for above the threshold is displayed.
If Auto is selected (blue), the following items can be set.
Type: Select grayscale or color scale. If Gray is selected, the minimum and
maximum values of the input are shown in black and white, respectively,
and 50% input is shown in gray. There are 255 gradations of color
change from white to black. If Color is selected, the minimum and
maximum values of the input are shown in blue and red, respectively,
and 50% input is shown in green. There are 50 gradations of color
change from red to blue. Also, if AUTO is selected for the color change
object and Detail (Min and Max) is not selected, the maximum and
minimum values of the assigned channel are applied.
Details: Select (blue) to set the minimum and maximum values.
Minimum/maximum value: Sets the maximum or minimum
values of the scale.
4. Move the cursor to the item you wish to edit, then enter a setting.
5. Click the OK button.
2.27 Creatng Color Change (Rectangle and Ellpse) Objects