Yokogawa DAQWORX - Manual (Page 49)

2-38 IM WX11-01E
A meter set is created with the desired channel assigned to it.
Note
• When you drag a channel over a meter set, the cursor changes to a . If the cursor
changes to a , this indicates that the selected channel can not be assigned to the meter
set. Be sure to confirm whether or not a channel may be assigned.
• To remove channel assignments from meter sets, see “Removing Channel or Alarm
Assignments from Objects” in section 2.30.
Edtng from the Propertes Dalog Box
1. Click the Edt icon in the OBJECT group of the EDIT page of the operation panel,
or click the Edt button in the object bar.
2. Select the meter set you wish to edit in the editing area.
3. Choose Edt > Propertes or right-click and select Properties.
The meter set properties dialog box is displayed.
Click here to edit the format type, decimal point, minimum value,
maximum value, units, and color.
Select F Type (fixed decimal representation)
or E Type (floating point representation).
4. Move the cursor to the desired item and click to enter a new value.
5. Click OK.
2.15 Creatng Meter Sets