Brocade FastIron GS and GS-STK Hardware Installation Guide - Manual (Page 36)

26 Brocade FastIron GS and GS-STK Hardware Installation Guide
53-1002186-02
Installing a redundant power supply
2
DRAFT: BROCADE CONFIDENTIAL
FIGURE 20 Installing the AC power cord
Installing a DC power supply
Use the following procedures to install DC power supplies in a FastIron GS or FastIron GS-STK
device.
Figure 21 shows the front panel of a DC power supply.
FIGURE 21 DC power supply front panel
DANGER
Before beginning the installation, refer to the precautions in “Power precautions” on page 20.
1 Cord retaining bail
2 AC power cord
1
2