Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 1142)

1090 Brocade Network Advisor IP User Manual
53-1003153-01
Chaining SSL certificates
32
3. Click Chain.
The Chain Certificates dialog box displays ( Figure 461 ).
FIGURE 461 Chain Certificates dialog box
The Certificates table includes the following details:
• ID — A unique system-assigned ID for each certificate entry.
• Status — Possible values are Valid, About to Expire, or Expired.
• Certificate — The user-assigned certificate name. The same name may be used on
different products.
• Key — The user-assigned key name. The same name may be used on different products.
• Start Date — The start date for the certificate. If only a key is present, this field is blank. For
chained certificates, the date for the last certificate in the chain is displayed.
• Expiration — The expiration date for the certificate. If only a key is present, this field is
blank. For chained certificates, the date for the last certificate in the chain is displayed.
• Certificate Size — The certificate size in bytes. If only a key is present, this field is blank.
• Key Strength — The key strength (size in bits). If only a certificate is present, this field is
blank.
• Common Name — The common name for the certificate. For chained certificates, the
name for the last certificate in the chain is displayed.
• Chain — Yes is certificates are chained, No if certificates are not chained. If only a key is
present, this field is blank.
• Deployed — Yes if the certificate or key is not deployed to the product. No if the certificate
or key is deployed to the product.
• Summary — An overall count of certificates.