Top products with unused ports monitor – Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 421
Brocade Network Advisor IP User Manual
369
53-1003153-01
Performance monitors
8
Top Products with Unused Ports monitor
The Top Products with Unused Ports monitor (
) displays the top products with ports not
in use in a table.
FIGURE 168
Top Product CPU Utilization monitor
The Top Products with Unused Ports monitor includes the following data:
•
Severity icon/monitor title — The worst severity of the data shown next to the monitor title.
•
Product — The product affected by this monitor.
•
Min — The minimum value of the measure in the specified time range.
•
Ports Not In Use — The number of ports not in use for the product.
•
Max — The maximum value of the measure in the specified time range.
•
Fabric — The fabric to which the device belongs.
•
Product Type — The type of product (for example, switch).
•
State — The product state (for example, Offline).
•
Status — The product status (for example, Reachable).
•
Tag — The product tag.
•
Serial # — The serial number of the product.
•
Model — The product model.
•
Port Count — The number of ports on the product.
•
Firmware — The firmware level running on the product.
•
Location — The location of the product.
•
Contact — A contact name for the product.
•
Refreshed — The time of the last update for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to