Displaying historical data collectors – Brocade Network Advisor IP User Manual v12.3.0 User Manual

Page 1179

Advertising
background image

Brocade Network Advisor IP User Manual

1127

53-1003153-01

IP historical performance monitoring

34

•

Name - Collector Basics page

•

Device or port level - Collector Basics page

•

Polling interval - Collector Basics page

•

Schedule setting - Collector Basics page

•

MIB selection - MIB Object page

•

Expression selection - Expression page

•

MIB index - MIB Index page

NOTE

The MIB Index page for system collectors will not show because you cannot configure the MIB
index for system collectors.

Displaying historical data collectors

Select Monitor > Performance > Historical Data Collectors to display configured historical data
collectors.

FIGURE 470

Historical Data Collectors dialog box

All configured data collectors are listed, showing the following information:

•

Name - The name of the data collector.

•

Enabled - Whether or not the data collector is enabled (Yes) or disabled (No).

NOTE

The Netiron Ether Stats Collector and NOS Ethernet Port Optics Collector will be disabled by default.

•

Polling Interval - The time interval, in minutes, between attempts to contact the information
source and gather data.

NOTE

The Polling Interval for NOS ethernet port optics collector is 30 minutes.

Advertising