Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 691)

Brocade Network Advisor IP User Manual 639
53-1003153-01
Switch, port, and LAG deployment
17
4. Click one of the following deployment options:
• Deploy now
• Save and deploy now
• Save deployment only
• Schedule
5. Click one of the following save configuration options:
• Save to running
• Save to running and startup
• Save to running and startup then reboot
The name for the scheduled product deployment is pre-populated with a
“DCB-MM-DD-YYYY-HR-MIN-SS” prefix. This is an editable field.
6. Provide a description for the product/port/LAG deployment.
7. If the Schedule option is selected, click the Use check box for one-time deployment. One-time
deployment is the only option.
The name of the origin product is a read-only field. The origin product receives the entire
configuration, unless it is removed from the Selected Targets list.
8. Select one or more of the following configurations, to be deployed on the selected targets.
NOTE
These configurations can be pushed to target DCB switches, FOS version 6.3.1_cee or
6.3.1_del.
For switches:
• QoS, DCB Map
• QoS, Traffic Class Map
• FCoE Map
• VLAN Classifiers and Rules
• LLDP Profiles
• 802.1x Configuration
NOTE
See “Source to target switch Fabric OS version compatibility for deployment” for restrictions.
For ports:
• Port attributes (interface mode, etc.)
• QoS, DCB Map / Traffic Class Map
• FCoE Map
• LLDP Profiles
• 802.1x Configuration