Port health violations widget, Customizing the out of range violations widget – Brocade Network Advisor IP User Manual v12.3.0 User Manual

Page 393

Advertising
background image

Brocade Network Advisor IP User Manual

341

53-1003153-01

Fabric Watch widgets

8

•

Violation Count — The total number of Fabric Watch rule violations for each category. Always
displays whether or not there is a violation.

•

Network Object Count — The number and network object type (such as switch, virtual machine,
port, trunk, and so on) with a Fabric Watch violation for each category. Always displays whether
or not there is a violation.

•

Refreshed — The time of the last update for the widget.

Customizing the Out of Range Violations widget

You can customize the widget to display violations for a specific fabric or group and time frame.

•

To display data for a specific fabric or group, refer to

“Creating a customized network scope”

on

page 325.

•

To display data for a specific duration, refer to

“Setting the time scope”

on page 327.

•

Sort the contents by clicking the column header. Click the same column header again to
reverse the sort order.

Port Health Violations widget

The Port Health Violations widget (

Figure 151

) displays the number of violations for each product

based on the selected fabric and a specified time range. There are four port health violation
widgets: All, ISL, Initiator, and Target.

FIGURE 151

Port Health Violations widget

The Port Health Violations widget displays the following data for each product:

•

Severity icon/port count/widget title — The color of the worst severity and the number of
products with that severity displays before the widget title.

•

Product — A product label such as product name, IP address, node WWN, domain ID, or zone
alias.

•

Port — A port identifier such as port name, number, address, WWN, user port number, or zone
alias.

NOTE

All non-FC ports display either the MAC address or the port name instead of WWN.

Advertising