Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 177
Brocade Network Advisor IP User Manual
123
53-1003153-01
Product group overview
4
NOTE
You can add a standalone VDX product or a VCS fabric to a user-defined Product Group;
however, the VCS fabric members are not included with the group.
•
Firmware
•
Build Label
•
Location
•
Contact
•
Description
•
VLANs
•
User_defined_property1 (up to 3)
8. Select one of the following from the Operator list:
•
Equals (valid for Regular Expression or Value type)
•
Not Equals (valid for Regular Expression or Value type)
•
Starts With (only valid for Value type)
Not available if you select Status or Product Type from the Property list.
•
Ends With (only valid for Value type)
Not available if you select Status or Product Type from the Property list.
•
Contains (only valid for Value type)
Not available if you select Status or Product Type from the Property list.
•
Does not contain (only valid for Value type)
Not available if you select Status or Product Type from the Property list.
•
Any of (only valid for Value type)
Only available if you select VLANs from the Property list.
•
None of (only valid for Value type)
Only available if you select VLANs from the Property list.
9. Enter a value or regular expression in the Value/Regular Expression field.
This field is case-sensitive.
If you selected Status from the Property list, the following predefined values are populated in
the Value/Regular Expression field:
•
Reachable
•
Not Reachable
•
Down
•
Healthy
•
Marginal
•
Degraded Link
•
Unhealthy