Elitegroup G732 (V2.0) - Manual (Page 102)

Upgrading your Memory
Refer to the following instructions and illustration for information on upgrading your
notebook's memory.
1.
2.
3.
4.
5.
Turn off the computer and disconnect the AC adapter and all peripherals.
Turn the notebook over so that the rear ports are facing you and locate the memory
module compartment.
Remove the screws that secure the RAM module compartment cover and set it aside
in a safe place.
Remove the compartment cover and then angling it up and out.
If you need to install a higher capacity module, gently push the edge clips on both
sides to release the module. Angle the card slightly upward and gently slide it from
its edge connector slot. Store the card in the anti-static bag that contains your new
module(s).
90